Pod systems, electronic cigarettes frying oil how to quickly solve?
Electronic cigarette oil frying oil is because of the smoke is not correct by high temperature heat wire to evaporate into steam, but after smoke oil is heating coil caused direct injection flow phenomenon, oil can be observed when coil, fire smoke particles around electronic smoke frying oil how to quickly solve?
Electronic cigarette oil frying oil is because of the smoke is not correct by high temperature heat wire evaporate into steam, but after smoke oil is heating coil caused direct injection flow phenomenon, oil can be observed when coil, fire smoke particles to eruption with popping sound, are some of the common experience of each player.
Whenever you are happy when using electronic cigarettes, often from the atomizer through suction nozzle spitting out the hot hot hot smoke oil, hot oil may touch the tongue of the oral cavity and throat is responsible for a lot of people very troubling problem, then try the following several methods, can effectively solve the trouble of frying oil.
Increasing power: if you use the voltage is too low, causing coil heat wire can't fast will cause oil smoke oil evaporation may happen, every time the increasing power of 5 w test smoke oil is correct after evaporation.
Excessive filling: for the first time using coil or atomization core, cotton will be infiltrating began to use first, then may be caused by excessive filling cotton can no longer absorb smoke after saturated oil spill caused frying oil.
To cotton: too little cotton causes RTA atomizer oil import too much smoke oil into the atomization caused frying oil storehouse, not enough on the RDA atomizer cotton will make heat between silk and cotton oil contains too much smoke, rearranging cotton adjusted to the proper dosage.
Cleaning condensing: timely remove the suction nozzle cleaning suction pipe condensate oil and smoke, can reduce frying oil occurrence probability.
Reduce stress: guided into atomized oil smoke through the negative pressure and cotton storehouse, big suction can cause excessive oil, keep the soft strength can be avoided.
High VG smoke oil: PG propylene glycol thinner than VG glycerin, were also more likely to flow, high content of VG smoke oil frying oil less happen.
Change the suction nozzle: prevent condensation suction nozzle and long suction nozzle prevent intake of condensate, also easy to clean to avoid backflow to the atomization. The importance of e-cigarette pod has increased as good vape mods have become a must in our daily life. You can find a large selection of quality at Coolvapor Offical. Go get your desired one. Shenzhen Coolvapor Electronic Technology Co., Ltd. are providing this to you at very low cost. Our claims are only based on different feed-backs received from various clients and not based on self-judgment.